Skip to content

massign

Assigns a MIDI channel number to a Csound instrument.

Syntax

massign(ichnl, insnum[, ireset])
massign(ichnl, "insname"[, ireset])

massign ichnl, insnum[, ireset]
massign ichnl, "insname"[, ireset]

Initialization

ichnl -- MIDI channel number (1-16).

insnum -- Csound orchestra instrument number. If zero or negative, the channel is muted (i.e. it does not trigger a csound instrument, though information will still be received by opcodes like midiin).

“insname” -- A string (in double-quotes) representing a named instrument.

ireset -- If non-zero resets the controllers; default is to reset.

Performance

Assigns a MIDI channel number to a Csound instrument. Also useful to make sure a certain instrument (if its number is from 1 to 16) will not be triggered by midi noteon messages (if using something midiin to interpret midi information). In this case set insnum to 0 or a negative number.

If ichan is set to 0, the value of insnum is used for all channels. This way you can route all MIDI channels to a single Csound instrument. You can also disable triggering of instruments from MIDI note events from all channels with the following line:

massign 0,0

This can be useful if you are doing all MIDI evaluation within Csound with an always on instrument(e.g. using midiin and turnon) to avoid doubling the instrument when a note is played.

Examples

Here is an example of the massign opcode. It uses the file massign.csd.

Example of the massign opcode.
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
<CsoundSynthesizer>
<CsOptions>
; Select audio/midi flags here according to platform
-odac  -+rtmidi=virtual -M0    ;;;realtime audio out and realtime midi in 
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too
; For Non-realtime ouput leave only the line below:
;-o massign.wav -W ;;; for file output any platform
</CsOptions>
<CsInstruments>

sr = 44100
ksmps = 32
nchnls = 2
0dbfs  = 1

giengine fluidEngine
; soundfont path to manual/examples
isfnum   fluidLoad "19Trumpet.sf2", giengine, 1
         fluidProgramSelect giengine, 1, isfnum, 0, 56

massign 0,0     ;disable triggering of all instruments on all channels, but
massign 12,10   ;assign instr. 10 to midi channel 12
massign 3,30    ;assign instr. 30 to midi channel 3

instr 10 ; soundfont only on midi channel 12

      mididefault   60, p3
      midinoteonkey p4, p5      ; in midi notes
ikey  init p4
ivel  init p5
      fluidNote giengine, 1, ikey, ivel
endin

instr 30 ; FM-oscilator only on midi channel 3

      mididefault   60, p3
      midinoteoncps p4, p5      ; in Hertz
icps  init p4
iamp  init p5
iamp  = iamp/127
kenv  madsr  0.5, 0, 1, 0.5
asig  foscil iamp*kenv, icps, 1, 1.414, 2, 1
      outs asig, asig 
endin 

instr 99 ; output sound from fluidengine

imvol init 7
aL, aR fluidOut giengine
      outs aL*imvol, aR*imvol
endin
</CsInstruments>
<CsScore>
; sine
f 1 0 16384 10 1

i 10 0 2 60 100  ;one note on the trumpet in midi and...
i 30 2 2 220 80  ;one FM note in Hz
i 99 0 60        ;stay active for 60 sec.
e

</CsScore>
</CsoundSynthesizer>

See also

MIDI input and Initialization

Orchestra Header Statements

Credits

Author: Barry L. Vercoe - Mike Berry
MIT, Cambridge, Mass.

New in Csound version 3.47

ireset parameter new in Csound5

Thanks goes to Rasmus Ekman for pointing out the correct MIDI channel range.