initc7 — Initializes the controller used to create a 7-bit MIDI value.


Initializes MIDI controller ictlno with ivalue


initc7 ichan, ictlno, ivalue


ichan -- MIDI channel (1-16)

ictlno -- controller number (0-127)

ivalue -- floating point value (must be within 0 to 1)


initc7 can be used together with both midic7 and ctrl7 opcodes for initializing the first controller's value. ivalue argument must be set with a number within 0 to 1. An error occurs if it is not. Use the following formula to set ivalue according with midic7 and ctrl7 min and max range:

ivalue = (initial_value - min) / (max - min)


Here is an example of the initc7 opcode. It uses the file initc7.csd.

Example 474. Example of the initc7 opcode.

See the sections Real-time Audio and Command Line Flags for more information on using command line flags.

; Select audio/midi flags here according to platform
-odac   -M0  ;;;realtime audio I/O with MIDI in
;-iadc    ;;;uncomment -iadc if RT audio input is needed too

sr = 44100
ksmps = 32
nchnls = 2
0dbfs = 1

instr 1	; expects MIDI controller input on channel 1
; run and move your midi controller to see result

imax = 1
imin = 0
ichan = 1 
ictlno = 7
	initc7	1, 7, 1			; start at max. volume
kamp	ctrl7	ichan, ictlno, imin, imax	; controller 7
	printk2	kamp
asig	oscil	kamp, 220, 1
	outs	asig, asig


f 1 0 4096 10 1

i1 0 20


See also

MIDI input and Initialization


Author: Gabriel Maldonado

New in Csound version 3.47

Thanks goes to Rasmus Ekman for pointing out the correct MIDI channel and controller number ranges.