outletk — Sends a krate signal out from an instrument to a named port.


Plugin opcode in signalflowgraph

Sends a krate signal out from an instrument to a named port.


outletk Sname, ksignal


Sname -- String name of the outlet port. The name of the outlet is implicitly qualified by the instrument name or number, so it is valid to use the same outlet name in more than one instrument (but not to use the same outlet name twice in one instrument).


ksignal -- krate output signal

During performance, the krate output signal is sent to each instance of an instrument containing an inlet port to which this outlet has been connected using the connect opcode. The signals of all the outlets connected to an inlet are summed in the inlet.


Here is an example of the outletk opcode. It uses the file outletk.csd.

Example 730. Example of the outletk opcode.

See the sections Real-time Audio and Command Line Flags for more information on using command line flags.

; Select audio/midi flags here according to platform
-odac     ;;;realtime audio out
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too
; For Non-realtime ouput leave only the line below:
; -o outletk.wav -W ;;; for file output any platform

sr = 44100
ksmps = 32
nchnls = 2
0dbfs  = 1

connect "bend", "bendout", "guitar", "bendin" 

instr bend 

kbend line p4, p3, p5 
printk2 kbend
      outletk "bendout", kbend 


instr guitar 

kbend inletk "bendin" 
kpch pow 2, kbend/12
asig oscili .4, p4*kpch, 1 
     outs asig, asig

f1 0 1024 10 1 0 1 0 1 0 1

i"guitar" 0  5   440
i"bend"   2 1.2 -12 12 
i"bend"   4 .2  -17 40 

See also

Signal Flow Graph Opcodes

More information on this opcode: http://www.csoundjournal.com/issue13/signalFlowGraphOpcodes.html , written by Michael Gogins


By: Michael Gogins 2009