Description

tabmorpha allows morphing between a set of tables of the same size, by means of a weighted average between two currently selected tables.

Syntax

aout tabmorpha aindex, aweightpoint, atabnum1, atabnum2, \
      ifn1, ifn2 [, ifn3, ifn4, ... ifnN]

Initialization

ifn1, ifn2 , ifn3, ifn4, ... ifnN - function table numbers. This is a set of chosen tables the user want to use in the morphing. All tables must have the same length. Be aware that only two of these tables can be chosen for the morphing at one time. Since it is possible to use non-integer numbers for the atabnum1 and atabnum2 arguments, the morphing is the result from the interpolation between adjacent consecutive tables of the set.

Performance

aout - The output value for index aindex, resulting from morphing two tables (see below).

aindex - main index index of the morphed resultant table. The range is 0 to table_length (not included).

aweightpoint - the weight of the influence of a pair of selected tables in the morphing. The range of this argument is 0 to 1. A zero makes it output the first table unaltered, a 1 makes it output the second table of the pair unaltered. All intermediate values between 0 and 1 determine the gradual morphing between the two tables of the pair.

atabnum1 - the first table chosen for the morphing. This number doesn’t express the table number directly, but the position of the table in the set sequence (starting from 0 to N-1). If this number is an integer, the corresponding table will be chosen unaltered. If it contains fractional values, then an interpolation with the next adjacent table will result.

atabnum2 - the second table chosen for the morphing. This number doesn’t express the table number directly, but the position of the table in the set sequence (starting from 0 to N-1). If this number is an integer, corresponding table will be chosen unaltered. If it contains fractional values, then an interpolation with the next adjacent table will result.

The tabmorpha family of opcodes is similar to the table family, but allows morphing between two tables chosen into a set of tables. Firstly the user has to provide a set of tables of equal length (ifn2 [, ifn3, ifn4,…ifnN]). Then he can choose a pair of tables in the set in order to perform the morphing: atabnum1 and atabnum2 are filled with numbers (zero represents the first table in the set, 1 the second, 2 the third and so on). Then determine the morphing between the two chosen tables with the aweightpoint parameter. After that the resulting table can be indexed with the aindex parameter like a normal table opcode. If the value of this parameter surpasses the length of tables (which must be the same for all tables), then it is wrapped around.

tabmorpha is the audio-rate version of tabmorphi (it uses interpolation). All input arguments work at a-rate.

Examples

Here is an example of the tabmorpha opcode. It uses the file tabmorpha.csd.

<CsoundSynthesizer>
<CsOptions>
; Select audio/midi flags here according to platform
-odac     ;;;realtime audio out
;-iadc    ;;;uncomment -iadc if realtime audio input is needed too
; For Non-realtime ouput leave only the line below:
; -o tabmorpha.wav -W ;;; for file output any platform
</CsOptions>
<CsInstruments>

sr = 44100
ksmps = 32
nchnls = 2
0dbfs   =1

giSine	 ftgen	0, 0, 8193, 10, 1						; sine wave
giSquare ftgen	0, 0, 8193, 7, 1, 4096, 1, 0, -1, 4096, -1			; square wave 
giTri	 ftgen	0, 0, 8193, 7, 0, 2048, 1, 4096, -1, 2048, 0			; triangle wave 
giSaw	 ftgen	0, 0, 8193, 7, 1, 8192, -1					; sawtooth wave, downward slope 

	
instr	1

iamp	= .7
aindex	phasor 110			; read table value at this index
aweightpoint = 0			; set weightpoint
atabnum1 line 0, p3, 3			; morph through all tables
atabnum2 = 2				; set to triangle wave
asig	 tabmorpha aindex, aweightpoint, atabnum1,atabnum2, giSine, giSquare, giTri, giSaw
asig	 = asig*iamp
	 outs asig, asig

endin
</CsInstruments>
<CsScore>

i1 0 10
e
</CsScore>
</CsoundSynthesizer>

See also

Read/Write Operations

Credits

Author: Gabriel Maldonado

New in version 5.06